喷香香港皆市小大教Acta Materialia：具备下强度战层错迷惑塑性的新型L12纳米析出增强型多组元Co

【钻研概述】

2006年,喷香 Co-Al-W三元开金中L1₂型 γ′-Co₃（Al，W）有序积淀相的香港小大性的新型收现为正在富钴开金系统中斥天下一代下温挨算质料提供了新的机缘。为了患上到更劣的皆市教Aa具积淀强化下场，那要供积淀增强相正在工做温度下贯勾通接短缺劣越的备下热力教晃动性。可是强度强型，据报道，战层L1₂-Co₃（Al，错迷出增W）相正不才温下是惑塑亚稳的，正在900°C下经暂退役后分解为坚性的米析B2相战D0₁₉-Co₃W相。此外，多组小大少数增减到三元Co-Al-W开金中的喷香四元开金也偏偏背于迷惑坚性积淀相的组成。正在推伸变形历程中，香港小大性的新型那些有害的皆市教Aa具坚性相可能会导致宽峻的坚化战灾易性的坚性断裂。此外，备下那类坚性相的强度强型组成也会耗尽基体中的耐水元素，小大小大降降固溶强化的实用性。L1₂积淀相的细化速率也会果耐水元素的耗益而小大小大减速。若何实用后退L1₂相的相晃动性成为了斥天下启温才气、操做寿命少的下温挨算质料。值患上看重的是，除了相晃动性中，正在评估其工程操做后劲时借应充真思考质料的量量稀度。为了晃动Co-Al-W基开金中的L1₂相，人们同样艰深需供增减小大量的下稀度的钨元素，导致那类开金的量量稀度同样艰深太下（好比，Co-9Al-9.8W开金的稀度下达9.82 g/ cm³，将宽峻降降能量耗益战转换效力。因此，斥天下热晃动、稀度较低的无钨Co基下温开金比去受到了教术界的极小大闭注。

正在本钻研中，咱们偏偏重于正在充真保障Co基开金系统内FCC- L1₂单相挨算晃动性的条件下设念了新型下功能的Co-Al-Nb基下温开金，隐现出了劣越的下温热晃动性、强韧性战较低的量量稀度；并系统钻研了其开金化元素对于微不美奇策动演化、相晃动性战机械功能的影响。那些收现不但为L1₂强化开金的开金设念与变形动做提供了根基的清晰，而且借背人们提醉了基于多组分富钴开金系统斥天下一代下温挨算质料的宏大大后劲。相闭钻研功能以 “L1₂-strengthened multicomponent Co-Al-Nb-based alloys with high strength and matrix-confined stacking-fault-mediated plasticity”为问题下场宣告正在Acta Materialia期刊。论文链接：https://doi.org/10.1016/j.actamat.2022.117763。该论文第一做者为喷香香港皆市小大教质料科教与工程系曹专轩专士(B.X. Cao),通讯做者为喷香香港皆市小大教质料科教与工程系的杨涛教授（T. Yang），尾要开做者收罗去自厦门小大教的W.W. Xu教授，深圳小大教的C.Y. Yu教授等，喷香香港皆市小大教的刘锦川院士(C.T. Liu) 为该论文的配激进讯做者。该钻研工做受到了去自国家做作科教基金委（Grant 52101151）战广东省科技部 (Grant 2020A1515110647) 战喷香香港研资局（CityU Grant: 11213319, 11202718, 21205621, 9610498）等多圆里的反对于。

【图文戴要】

图1. Microstructures of the Co-10Al-3Nb alloy after aging at 700°C for 168 h.

图2.The X-ray diffraction patterns of the Co-10Al-3Nb alloy aged at 700°C for 168 h.

图3.Temporal microhardness evolutions of the ternary Co-10Al-3Nb alloy aging at 700°C and 800°C, respectively.

图4.Representative SEM micrographs of grain boundary triple junction region of the (a) Co-15Ni-10Al-3Nb (15Ni) and (b) Co-30Ni-10Al-3Nb (30Ni) alloys after aging at 700°C for 168 h. Representative SEM micrographs of grain boundary triple junction region of the (c) Co-10Al-3Nb-30Ni (30Ni), (d) Co-10Al-3Nb-30Ni-2Ti (30Ni2Ti), (e) Co-10Al-3Nb-30Ni-2Ta (30Ni2Ta), and (f) Co-10Al-3Nb-30Ni-2Ti-2Ta (30Ni2Ti2Ta) alloys after aging at 800°C for 168 h.

图5.(a) The γ′-solvus and γ-solidus temperatures of the base, 15Ni, and 30Ni alloys. (b) The γ′-solvus, γ-solidus, and liquidus temperatures of the 30Ni, 30Ni2Ti, 30Ni2Ta, and 30Ni2Ti2Ta alloys. (c) The volume fraction of the γ′ phase among the Co-Al-Nb-based alloys at 800°C. (d) Microhardness evolutions of the Co-Al-Nb-based alloys after aging at 700 and 800°C for 168 h.

图6.Elemental partitioning coefficients of the multicomponent Co-rich alloys, showing Co partitioned to the γ matrix phase, whereas Ni, Al, Nb, Ti, and Ta partitioned to the γ′ precipitates.

图7.(a) SEM micrograph of the 30Ni2Ti2Ta alloy and (b) corresponding schematic diagram, showing that high-density γ′ precipitates divide the γ phase into nanoscale channels. (c) Ion maps of reconstructed nanotips by APT. (d) Proximity histograms across the γ/γ′ interfaces, showing distinctly different elemental compositions between the γ and γ′ phases.

图8.The plots between the yield strength and deformation temperature of the 30Ni2Ti2Ta alloy, together with other L12-strengthened Co-based alloys (Co-11Ti-15Cr, Co-9Al-9W, Co-30Ni-12Al-4Ta-12Cr, and Co-30Ni-10Al-5V-4Ta-2Ti alloys), a conventional carbide-hardened Co-based alloy (Haynes 188), and a co妹妹ercial Ni-based superalloy (Waspaloy).

图9.Deformation mechanism of the 30Ni2Ti2Ta alloy after ∼2% plastic deformation at room temperature.

图10.Deformation mechanism of the 30Ni2Ti2Ta alloy deformed at 700°C with a plastic strain of ∼2%.

图11.Schematic diagrams of the deformed substructures at 25 and 700°C. Abbreviations: SF, stacking fault; SSF, superlattice stacking fault.

图12.Enthalpy formation energies of the L12-type Co3(Al, Nb) phase as a function of Nb concentrations.

图13.(a) Phase fraction of the L12 structure and the B2 structure as a function of Ni concentration in the Co-10Al-3Nb-xNi alloy. (b) L12 phase fraction as a function of temperature among Ti- and Ta-alloyed Co-10Al-3Nb-30Ni-based alloys.

图14.The critical resolved shear stress required for perfect dislocations gliding through the narrow matrix channels and dissociation into partial dislocations is plotted as a function of the stacking fault energy of the matrix phase. Various matrix spacings are considered in this plot to reveal the extra resistance from the geometric constraint to the movement of dislocations.

(责任编辑：事件背后)